Zanussi ZDF4010 Instrukcja Użytkownika

GBUser manual 2DishwasherZDF4010

Caution! • Do not lift or lower the basket on one side only.• If the basket is in the upper position, do not put cupson the cup racks.Use of detergent

Activate or deactivate the multitab function beforethe start of a washing programme.You cannot activate or deactivate the multitab functionwhen the pr

– All the programme lights come on,– The programme in progress indicator light goesoff.2. Release function buttons B and C to cancel the wash-ing prog

Cleaning the filtersImportant! Do not use the appliance without the filters.Make sure that the installation of the filters is correct.Incorrect insta

Fault code and malfunction Possible cause and solution•digital display shows The dishwasher does not fill with water• The water tap is blocked or furr

The cleaning results are not satisfactoryLimescales particles on the dishes • The salt container is empty.• The water softener is adjusted on a wrong

InstallationWarning! Make sure that mains plug isdisconnected from the mains socket duringinstallation.Fitting under a counterPut the appliance adjac

The internal diameter must not be smaller than the diam-eter of the hose.If you connect the water drain hose to a trap spigot underthe sink, remove th

18

19

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _ _ _ _ _

To buy accessories, consumables and spare parts at our online shop please visit:www.zanussi.co.ukwww.zanussi.com156985790-00-042009

• Do not change the specifications or modify this prod-uct. Risk of injury and damage to the appliance.• Do not use the appliance:– if the mains cable

Indicator lightsEnd of programme Comes on when the washing programme is completed.Multitab Comes on when you activate the multitab function. Refer to

Washing programmesWashing programmesProgramme Degree of soil Type of load Programme descriptionHeavy soil Crockery, cutlery,pots and pansPrewashMain w

Use of the applianceRefer to the following instructions for each step of pro-cedure:1. Make a check if the water softener level is correct forthe wate

12Set switch to position 1 or2.Electronic adjustmentThe water softener is set at the factory at level 5.1. Switch on the appliance.2. Make sure that t

Use of rinse aidCaution! Only use branded rinse aid fordishwashers.Do these steps to fill the rinse aid dispenser:1 2M A X1 2 3 4 +34Caution!

1Arrange service dishesand large lids around theedge of the lower basket.23The rows of prongs in thelower basket can be flat toload pots, pans and bow