Zanussi ZGG65414SA Instrukcja Użytkownika

ENUser manualGas hobZGG65414IE GB

Do not place unstable or deformed pots on therings to prevent from spill and injury.Warning! Flame diffuser are notrecommended.Information on acrylami

ing and check that the burner crown holes arenot obstructed.Periodic maintenancePeriodically speak your local Service ForceCentre to check the conditi

If there is a fault, first try to find a solution to theproblem yourself. If you cannot find a solution tothe problem yourself, speak your dealer or t

Electric supply: 230 V ~ 50 Hz3 core flexible cablewith non rewireableplug fitted with a 3 ampcartridge fuseGas connection: G 1/2 "Category: II2H

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 397225801-B-152012

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Product description _ _ _ _ _ _ _ _ _ _

and that it is centrally positioned on the ringsin order to avoid safety risks.• Do not use unstable cookware or cookwarewith damaged bottom. There is

• Disconnect the appliance from the elec-trical supply, before you do the mainte-nance work or you clean it.• The electrical mains terminal is live.•

edges of the hob is 400 mm. If it is fitted below400 mm a space of 50 mm must be allowedfrom the edges of the hob.For appliances installed in the Repu

4. With a thin screwdriver, adjust the by-passscrew position.11 The by-pass screw– If you change from natural gas G20 20mbar to liquid gas, fully tigh

1 23451Green and Yellow23 amp fuse3Brown4Cord clamp5BlueShould the plug need to be replaced for anyreason, the wires in the mains lead are colouredin

min 20 mm(max 150 mm)30 mm60 mmbaa) Removable panelb) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indi-cation a

2. Keep the control knob pushed for approxi-mately 5 seconds; this will let thermocou-ple to warm up. If not, the gas supply willbe interrupted.3. Adj