Zanussi ZGF982IX Instrukcja Użytkownika Pobierz pdf (Strona 8)

Lighting the burnersLighting the burners

Lighting the burners

For easier lighting, proceed before putting a pan on the panFor easier lighting, proceed before putting a pan on the pan

For easier lighting, proceed before putting a pan on the pan

support.support.

support.

To light a burner:

# turn the relevant knob anti-clockwise to

maximum position (

), then push it down

to ignite the burner.

# Then, check that the flame is regular adjust it

as required.

If the burner does not ignite, turn the control

knob to zero, and try again.

If you cannot light the flame even after

severalattempts, check the "cap" (Fig. - lett.

A) and the"crown" (Fig. - lett.

B) are in the

correct position.

When switching on the mains, after installation

or a power cut, it is quite normal for the spark

generator to be activated automatically.

In the absence of electricityIn the absence of electricity

In the absence of electricity, ignition can

occur without the electrical device; in this

case, approach the burner with a flame, push

the relevant knob down and turn it anti-

clockwise until it reaches the maximum

position.

If the control knobs become difficult to turn,

please contact your local Service Force

Centre.

Using the Wok StandUsing the Wok Stand

Using the Wok Stand

A wok stand is provided to enable you to use a

round bottomed wok on the hob. The wok stand

must only be used on the central burner, and

should not be used with any other type of wok or

pan. When fitting the wok stand, ensure the

recesses in the frame fit securely onto the bars of

the pan supports, as shown in the picture.

OperationOperation

Operation

A - Burner cap

B - Burner crown

C - Ignition electrode

Triple crown burner

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Zanussi ZGF982IX Instrukcja Użytkownika Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Zanussi ZGF982IX