Zanussi ZGX65424XA Instrukcja Użytkownika Strona 1

ENZGX65424XAUser ManualHobMA

InstallationWARNING!Refer to Safety chapters.Before the installationBefore you install the hob, write down theinformation bellow from the rating plate

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.

Possibilities for insertionThe panel installed below the hob must be easyto remove and let an easy access in case atechnical assistance intervention i

Appliance category: II2H3+ Gas connection: G 1/2" Appliance class: 3 Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL POWER kW MINIMUM POW

• When you heat up water, use only the amount you need.• If it is possible, always put the lids on the cookware.• When the liquid starts to boil, turn

www.zanussi.com 15

www.zanussi.com/shop867305164-B-262014

ContentsSafety information 2Safety instructions 3Product description 5Daily use 6Hints and tips 7Care and cleaning 7Troubleshooting 8Installation 10Te

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off theap

• Before carrying out any operation make surethat the appliance is disconnected from thepower supply.• Make sure that the electrical information onthe

• Do not let cookware to boil dry.• Be careful not to let objects or cookware fallon the appliance. The surface can bedamaged.• Do not activate the co

Control knobSymbol Descriptionno gas supply / off positionSymbol Descriptionignition position / maximumgas supplyminimum gas supplyDaily useWARNING!Re

CAUTION!In the absence of electricity you canignite the burner without electricaldevice; in this case approach theburner with a flame, turn the contro

• Always use cookware with clean bottom.• Scratches or dark stains on the surface haveno effect on how the hob operates.• Use a special cleaner applic

Problem Possible cause Remedy The fuse is released. Make sure that the fuse is thecause of the malfunction. If thefuse releases again and again,conta